How To Use Trail or Hunting Camera? – Simple User Guide
Updated on by
Before using the trial or hunting camera, you have to have an SD card inserted. If you do not, the camera will not take pictures and will not even turn on.
Also, it is necessary to have the batteries inserted with the indicated polarity so that it is put into operation. Do not forget to place the batteries with the indicated polarity.
How to Place the Game camera or Trialcam
Try to place the camera more than one meter from the ground, to maximize both the range of motion sensors and the range of infrared.
In the place where you put the hunting camera, it clears its field of detection of branches and leaves that can move with the air, because this will make it take "false" photos (without an animal in the photo).
In summer, the trailcam can take "false" photos when there are large temperature differences when blowing the air or passing a zone of the sun to shade. To alleviate this, if your trail camera has this option, set the detection mode from high to low or program the trailcam so that it does not take pictures in the central hours of the day.
Scope of the Motion Sensor
When you put the camera, must tests with the motion sensor to see where the camera catches you and where not. The Most cameras have a test mode, which will cause a red light whenever it detects motion lights. Move around and see where and how far you get.
The range of the motion/temperature sensor depends on the external humidity and temperature conditions. As it works with temperature difference, this difference is less if the environment is hot and higher if it is cold. That is why the camera will detect farther if it is cold, and less if it is hot.
You may read: Best Prism Scopes of 2018
We recommend the use of alkaline batteries in all trail cams. They last longer, resist the low temperatures and do not usually break and take acid.
The best quality batteries tested to date are the energizer plus, followed by the Duracell . Rechargeable batteries can be used but these last less and their resistance to cold is lower.
The autonomy of a trailcam varies depending on several parameters. When you consume a trailcam the most is making videos at night and at least, it is taking daytime photos.
Additionally, trailcams can be connected to a battery or a solar panel so they last longer without changing the batteries. It is a recommended option if we want to make many videos and we don't want to replace batteries every so often.
You may visit this blog for your solution of power.
All the trial camera marketed on this page have IP54 protection. This means that withstand dust and rain, snow, wind, water, etc. In addition, temperatures between -20º and 60º are operative. They resist humidity between 90% and 95%.
Notwithstanding the above, we must try to be careful: do not put it upside down and let the rain fall on the bottom, avoid being covered with snow, do not put it buried in a moist soil, etc.
Remember that it is not aquatic so if you submerge it in water, it will not work and will void the warranty.